BY060 Series
Depth Gauge with Double Hooks-Stainless
·The products are according with GB/T1214.4 or DIN862
·Made of stainless steel and manufactured with modern technology.
·The main scale and the vernier are satin chromed.
·The beam and the venier are entirely heat-treated,and all the measuring faces are specially hardened.
·Special requirement can be satisfied at request.
·The products are according with GB/T1214.4 or DIN862
·Made of stainless steel and manufactured with modern technology.
·The main scale and the vernier are satin chromed.
·The beam and the venier are entirely heat-treated,and all the measuring faces are specially hardened.
·Special requirement can be satisfied at request.
|
Cat.No. |
Range(mm/in) |
Reading(mm/in) |
Main cross section(mm) |
Bridge-length(mm) |
|
BY0600153 |
0-150 |
0.05 |
8 × 3 |
100 |
|
BY0600203 |
0-200 |
0.05 |
8 × 3 |
100 |
|
BY0600303 |
0-300 |
0.05 |
8 × 3 |
100 |
|
·There are two scales on both upper and lower surfaces of the beam,it could be used in two directions.In one direction,it is used as a normal depth gauge,and in another direction,it is used as a depth gauge with hook. | ||||
